No image available
Other Products ｜Heavy Duty Hydraulic Sheet Metal Shear SH-5210-HD
USD 7,230.09
Other Products / General Merchandise / Other Products
With its welded steel frame, this hydraulic sheet metal shear offers a long lifespan of use cutting thick materials for high production. The adjustable blade gap and rake angle ensure quality cuts.
52” length.
10 gauge mild steel maximum capacity.
Minimum capacity of 24 gauge mild steel.
7.5 hp motor runs on 220-volt 3-phase power.
Industrial-grade hydraulic system is located in the front for easy fluid changes.
35 to 47 strokes per minute for speedy production.
Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction.
Manually adjustable 23.62” backgauge ensures precise repeatability.
Heavy duty table with roller bars slides material into the machine more easily.
Side gauges keep the cut at 90° (if you so choose) without you needing to make a guiding line on the material.
Switch between 3 modes as needed:
Jog mode: Inching the blade down to the material.
Single cycle mode: One cut for one pedal push.
Automatic cycling mode: Continuously cutting for production runs.
Adjustable rake angle dial makes it easy to fit your material thickness to minimize burr and put less strain on hydraulics.
Convenient blade gap adjustment lets you eliminate folding and twisting.
Comes standard with high carbon chromium blades.
2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money.
Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
Shadow line creates a reference line on the material so you know exactly where the cut will be.
The SH-5210-HD plate shear is covered by a 1-year parts warranty.
Item Number
SH-5210-HD
Blade Rake Angle
.5 to 2.0 degrees
Back Gauge Length
23.62"
Shear Length
52"
Motor
7.5 hp
Thickness (SS)
10 ga. (13 ga.)
Strokes Per Minute
35 – 47
Front Gauge Length
39.37"
Blade Angle
1/2° – 2° Adjustable
Blade Gap Adjustment
Manual, Lever Acuated
Power
220V / 3-phase
Shipping Weight
4200lbs
Minimum Material Thickness
24ga
Shipping Dimensions (Inches)
88x45x66
* specifications subject to change without notice.
Brand:BaileighSKU:BA9-1007122Tags:Call for Pricing, Recommendations disabled, Sheet Metal Shears
View product52” length.
10 gauge mild steel maximum capacity.
Minimum capacity of 24 gauge mild steel.
7.5 hp motor runs on 220-volt 3-phase power.
Industrial-grade hydraulic system is located in the front for easy fluid changes.
35 to 47 strokes per minute for speedy production.
Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction.
Manually adjustable 23.62” backgauge ensures precise repeatability.
Heavy duty table with roller bars slides material into the machine more easily.
Side gauges keep the cut at 90° (if you so choose) without you needing to make a guiding line on the material.
Switch between 3 modes as needed:
Jog mode: Inching the blade down to the material.
Single cycle mode: One cut for one pedal push.
Automatic cycling mode: Continuously cutting for production runs.
Adjustable rake angle dial makes it easy to fit your material thickness to minimize burr and put less strain on hydraulics.
Convenient blade gap adjustment lets you eliminate folding and twisting.
Comes standard with high carbon chromium blades.
2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money.
Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
Shadow line creates a reference line on the material so you know exactly where the cut will be.
The SH-5210-HD plate shear is covered by a 1-year parts warranty.
Item Number
SH-5210-HD
Blade Rake Angle
.5 to 2.0 degrees
Back Gauge Length
23.62"
Shear Length
52"
Motor
7.5 hp
Thickness (SS)
10 ga. (13 ga.)
Strokes Per Minute
35 – 47
Front Gauge Length
39.37"
Blade Angle
1/2° – 2° Adjustable
Blade Gap Adjustment
Manual, Lever Acuated
Power
220V / 3-phase
Shipping Weight
4200lbs
Minimum Material Thickness
24ga
Shipping Dimensions (Inches)
88x45x66
* specifications subject to change without notice.
Brand:BaileighSKU:BA9-1007122Tags:Call for Pricing, Recommendations disabled, Sheet Metal Shears
Product details
With its welded steel frame, this hydraulic sheet metal shear offers a long lifespan of use cutting thick materials for high production. The adjustable blade gap and rake angle ensure quality cuts.
52” length.
10 gauge mild steel maximum capacity.
Minimum capacity of 24 gauge mild steel.
7.5 hp motor runs on 220-volt 3-phase power.
Industrial-grade hydraulic system is located in the front for easy fluid changes.
35 to 47 strokes per minute for speedy production.
Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction.
Manually adjustable 23.62” backgauge ensures precise repeatability.
Heavy duty table with roller bars slides material into the machine more easily.
Side gauges keep the cut at 90° (if you so choose) without you needing to make a guiding line on the material.
Switch between 3 modes as needed:
Jog mode: Inching the blade down to the material.
Single cycle mode: One cut for one pedal push.
Automatic cycling mode: Continuously cutting for production runs.
Adjustable rake angle dial makes it easy to fit your material thickness to minimize burr and put less strain on hydraulics.
Convenient blade gap adjustment lets you eliminate folding and twisting.
Comes standard with high carbon chromium blades.
2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money.
Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
Shadow line creates a reference line on the material so you know exactly where the cut will be.
The SH-5210-HD plate shear is covered by a 1-year parts warranty.
Item Number
SH-5210-HD
Blade Rake Angle
.5 to 2.0 degrees
Back Gauge Length
23.62"
Shear Length
52"
Motor
7.5 hp
Thickness (SS)
10 ga. (13 ga.)
Strokes Per Minute
35 – 47
Front Gauge Length
39.37"
Blade Angle
1/2° – 2° Adjustable
Blade Gap Adjustment
Manual, Lever Acuated
Power
220V / 3-phase
Shipping Weight
4200lbs
Minimum Material Thickness
24ga
Shipping Dimensions (Inches)
88x45x66
* specifications subject to change without notice.
Brand:BaileighSKU:BA9-1007122Tags:Call for Pricing, Recommendations disabled, Sheet Metal Shears
52” length.
10 gauge mild steel maximum capacity.
Minimum capacity of 24 gauge mild steel.
7.5 hp motor runs on 220-volt 3-phase power.
Industrial-grade hydraulic system is located in the front for easy fluid changes.
35 to 47 strokes per minute for speedy production.
Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction.
Manually adjustable 23.62” backgauge ensures precise repeatability.
Heavy duty table with roller bars slides material into the machine more easily.
Side gauges keep the cut at 90° (if you so choose) without you needing to make a guiding line on the material.
Switch between 3 modes as needed:
Jog mode: Inching the blade down to the material.
Single cycle mode: One cut for one pedal push.
Automatic cycling mode: Continuously cutting for production runs.
Adjustable rake angle dial makes it easy to fit your material thickness to minimize burr and put less strain on hydraulics.
Convenient blade gap adjustment lets you eliminate folding and twisting.
Comes standard with high carbon chromium blades.
2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money.
Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
Shadow line creates a reference line on the material so you know exactly where the cut will be.
The SH-5210-HD plate shear is covered by a 1-year parts warranty.
Item Number
SH-5210-HD
Blade Rake Angle
.5 to 2.0 degrees
Back Gauge Length
23.62"
Shear Length
52"
Motor
7.5 hp
Thickness (SS)
10 ga. (13 ga.)
Strokes Per Minute
35 – 47
Front Gauge Length
39.37"
Blade Angle
1/2° – 2° Adjustable
Blade Gap Adjustment
Manual, Lever Acuated
Power
220V / 3-phase
Shipping Weight
4200lbs
Minimum Material Thickness
24ga
Shipping Dimensions (Inches)
88x45x66
* specifications subject to change without notice.
Brand:BaileighSKU:BA9-1007122Tags:Call for Pricing, Recommendations disabled, Sheet Metal Shears
Product information
COL-959079d90a7f75095c0a41b2b00dcea4d5d34980
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
